<form id="3xhj9"><th id="3xhj9"></th></form><span id="3xhj9"><th id="3xhj9"></th></span>
    <p id="3xhj9"><dl id="3xhj9"><dl id="3xhj9"></dl></dl></p>
    <address id="3xhj9"></address>

          <noframes id="3xhj9">

          HomePage   |    酒悶嶄猟  
           
           
          Products
                   UNIVERSAL POWDER
                   SPECIAL POWDER
           
           
            UNIVERSAL POWDER You Position:Home > PRODUCTS > UNIVERSAL POWDER
          Epoxy/Polyester Powder Coatings
          Introduction:     Epoxy/Polyester is mainly made of epoxy resin and polyester resin.
          Feature:       Good mechanical performance.
                      Smooth, glossy and good film
                      Excellent corrosion resistance.
                      Good heat resistance and light resistance than pure epoxy powder

          Uses:        Coating and decoration of metal (steel or aluminum) items for indoor items
                      such as electrical appliances, hardware etc

          Series of Product:   Standard and lower temperature curing products
                      It could be made to various luster and color
                      It could be made to various kinds of art texture products,such as flat,lanose
                      grain,webbing,wrinkle,sandy,hammer tone etc

          Physical Property:   Density: 1.1-1.8 g/cm3,standard and lower temperature curing
                      Granularity distribution:Varies with different purpose.Average particle size is
                      28-40um,10um-84um powder >90% Volatility<2%

          Coating Film Property:
          Properties Test Method Value
          Pencil Hardness  GB/T 6739-1996 − H
          Impact strength test GB/T 1732-93 50 KG cm
          Erichsen cupping GB 9753-88 6mm
          Adhesion GB/T 9286-1998 0grade
          Bend test GB 6742-86 3mm
          Salt spray test GB/T 1771-91 100h no change
          Humid heat test GB/T 1740-79 1000h + 1 grade
          Accelerated light aging test ASTM G154 QUV 0.78m/m2 340nm 500h


          Applying Condition:   Pretreatment:Phosphated Chromated
                      Coating method:Electrostatic-fluidized bed coating;Corona electrostatic spray
                      coating;Tribo-electrification coating
                      Curing condition: 200<C/10min or 180<C/15min or 160<C/20min

          Packing:       Double pvc bag,net weight is 20KG each carton

          Storage:       Dry room with good ventilation, Temperture is lowder than 30<C,avoid direct
                      sunlight.There are 12 months to maintain under this condition.Expired prod
                      ucts still cannot be used unless testing results meet the utilization standards
          Health and Safety:   There are no hazardous ingredients in all the raw materials of powder coatings
                      and no hazardous gas will be released while using.However,the inhalation of
                      dusts should be avoilded.An operator should wear an anti-dust mask and try
                      best to avoid long-term contact with the powder coating.Those coaings sticked
                      on the skin should be washed by soap

           
          Copyright2011 chinapont All rights reserved.
          Chinapont powder coatings
          酔眉糧廳佚圉峠岬